EMotorize.com

Mirror mounts are designed to thread into the un-used mirror mounting holes found on many metric motorcycles. Threads into any 10mm x 1.25 reverse ( righthand ) pitch mirror hole. To learn which mount is right for your motorcycle please click the link below. Be sure to cross reference the year before placing your order. Some mounts are only for selected years. PART # 31000RTop MeasurementStandard 2.25 x 3"Mount StyleLeft Side Threaded Mirror BaseShaft Length3.5"Shaft StyleBallHeight4.25" / 1.0" (from stem nut)

A mount that fits the opening in the top of the steering stem. Uses an o-ring shaft that gets progressively tighter as it is installed. Mounts devices center of bike over the top triple clamp. To view the Honda model numbers please click the link below. Be sure to cross reference the year before placing your order. Some mounts are only for selected years. PART # 10994Top MeasurementStandard 2.25 x 3" (with four sets of mounting holes to allow leftright and center mounting options)Mount StyleStem Mount 19mmShaft Length3.5"Shaft StylePivotHeight4.25" / 1.0" (from stem nut)

A mount that fits the opening in the top of the steering stem. Uses an o-ring shaft that gets progressively tighter as it is installed. Mounts devices center of bike over the top triple clamp. To view the Suzuki and Honda model numbers please click the link below. Be sure to cross reference the year before placing your order. Some mounts are only for selected years.PART # 10997Top MeasurementStandard 2.25 x 3" (with four sets of mounting holes to allow leftright and center mounting options.Mount StyleStem Mount 17mmShaft Length3.5"Shaft StylePivotHeight4.25" / 1.0" (from stem nut)

This mount has two independent movable top plates and fits the opening in the top of the steering stem. Uses an o-ring shaft that gets progressively tighter as it is installed. Mounts devices center of bike over the top triple clamp.To view the Yamaha model numbers please click the link below. Be sure to cross reference the year before placing your order. Some mounts are only for selected years.PART # 10998DTop MeasurementTwo Standard 2.25 x 3" top plates.Mount StyleStem Mount (replacement stem nut)Shaft Length3.5"Shaft StylePivotHeight4.25" / 1.0" (from stem nut)

The Quick Change Adaptor makes changing accessories a snap. Mount your device (radar detector camera etc.) to the Quick Change plate and then slide it onto any standard TechMount top plate and it locks into place with a spring loaded locating pin. Simply press the pin to release the adapter and slide off to remove. Will work with double top plates. Does not work with wide top plates or with item HGS021 top plate.PART # 60003